1. Driveway cleaning
  2. Cleaning concrete driveways
  3. Sealing a concrete driveway

Sealing a Concrete Driveway

Learn how to seal a concrete driveway with this step-by-step guide. Find out the supplies you will need and what to expect during the sealing process.

Sealing a Concrete Driveway

Sealing a concrete driveway is an important step in maintaining the longevity of your driveway. Sealing a driveway helps protect it from weather, sun damage, and other wear and tear, which can help extend the life of your driveway and prevent costly repairs down the road. Whether you are looking to seal a new concrete driveway or an existing one, there are a few steps you need to follow to ensure the job is done right. This article will explain how to properly seal a concrete driveway, as well as provide tips on how to maximize the performance of your sealant.

Before beginning the sealing process, it’s important to make sure your concrete driveway is clean and dry. Sweep away any debris or dirt and hose down the driveway with water. If there are any cracks or chips in the concrete, fill them with a concrete patching compound and let it dry before continuing. Once the driveway is clean and dry, it’s time to start sealing.

You’ll need a paint roller, an extension pole and a sealant made specifically for concrete driveways. Start by applying the sealant along the edges of the driveway, using the paint roller to spread it evenly. Then, start rolling the sealant in even strokes across the entire surface of the driveway. Make sure to cover every inch of the driveway with sealant and use a brush to get into tight corners or crevices.

After applying the sealant, let it dry for 24 hours before driving on it. This will give it time to cure and create a protective barrier. Sealing a concrete driveway is an important part of regular maintenance and will help to keep your driveway looking great for many years to come. Sealing also protects your driveway from the elements, preventing damage from moisture, sun exposure, and extreme temperatures. The process is simple and only takes a few hours of your time.

With the right supplies and a bit of elbow grease, you can have your concrete driveway looking like new in no time.

Tips for Sealing Concrete Driveways

Sealing a concrete driveway is an important part of regular maintenance to help protect it from the elements and keep it looking great. To get the best results, there are some key tips to keep in mind.

Make sure the temperature is above 50 degrees Fahrenheit when applying sealant.

Sealant should not be applied if the temperature is too cold as it can prevent it from setting properly.

Avoid applying sealant on hot days

as this can cause uneven drying or bubbling of the sealant.

If you plan on painting your driveway after sealing, use a water-based paint so it can bond with the sealant.

Allow at least 24 hours of drying time

after applying sealant before driving on it. Following these tips will help ensure the best results when sealing a concrete driveway. Sealing your concrete driveway is an important step in protecting it from damage caused by the elements and prolonging its lifespan.

With the right supplies, a bit of know-how, and a few simple steps, you can easily seal your driveway yourself. Just make sure your driveway is clean and dry before you start, and allow plenty of time for drying before driving on it.


Concrete Driveway, Maintenance, Supplies, Steps for Success.